Product Description

PW-CJ Series ink is a two-component diamond – pearly luster ink for glass and metal. It is made up of high grade colophony and pigment.

Application ：
Glass and tempered glass (for decoration of appliance ，door， furniture，cabinet  and so on ) .
 
Product features :
1   High gloss, low odor ,high hardness (2 H at least) , diamond – pearly lustre .
2   Excellent adhesion :  anti-stickiness  (It can be passed by baige test  ) and anti-scratch .
3   Environment friendly :  in accordance with the ROHS environmental standards .
4   The diameter of parricles :< 5um.    
     Fluidity :  25-45 mm/min ;   Viscosity: 80-100P.
4   Two-component: need to add 400588 hardener (3-10%)
     Note :   1)  The proportion depends on Drying conditions .
                  2)  Productivity of a two-component is 3 times faster than that of a
                       single- component of either one of them.  It is suitable for high –speed printing .
5   Nature:
    1)   Boiling water resistance  :   It can resist 100℃boiling water after dried .
    2)   Alcohol resistance  :  It can resist alcohol after dried.
    3)   Adhesion :   It couldn’t be peeled off by adhesive tape.
    4)   Anti-scratch:   It couldn’t be scratched .
 
Techniques :
Screen printing and handwork is ok.
 
Screen printing plate and quantity :
1   Mesh :  60-350
2   Quantity :  1kg can print 20-30㎡by200–mesh screen printing plate .
 
Usage of thinner and hardener:
 
Hardener(3-10%) :  400588
The proportion depends on drying conditions .
Thinner(10-30%)  :  4001 for low odor slow drying  ,
                                   for environmental friendliness :  783 for slow drying,  718 for medium 
                                   drying or 719 for quick drying).
The Proportion depends on weather conditions.
 
Note :
The ink which has been added hardener must be finished within 24 hours and can be stored for 1 week . Please kindly comply with the above proportion before printing, otherwise, the ink will become cake .
 
Dilution and net washing :
1   The ink should be diluted by (10-30% ) thinner before printing. After finished continuous 
     printing the screen printing plate should be washed by 007B screen washing agent .
2   Thinner (10-30%) : 4001 for low odor slow drying thinners,
                                    For environmental friendliness use :  783 for slow drying,  718 for medium
                                    drying, or 719 for quick drying.
The Proportion depends on weather conditions .
 
Drying methods :
1   Natural drying :  Surface drying time will be 20-60 minutes ,and total drying time will be
                                 48hours .
2   Baking :   Baked for 5~10minutes (100℃-160℃)  , the ink would be solidified soon .
          Note :   If your glass thickness is 3-4mm ,drying time at 150℃ will be 5minutes and
                 you can get the better drying effect .

Package and Color :
1   Package :  1 kg /tin ;  5 kg/tin ;  20kg/ tin
2   Color :
    
 
Storage time :  It can be stored for 18 months without adding adhesion promoter.
Note ：  
    1   Metal materials including anti-rust oil will debase the adhesion, please remember     
         to clear the anti-rust oil before printing.
    2   Glass is of different characteristic ,.so it is necessary to clean the surface of glass  
         before printed.