Product Description

PW-CM Deinking agent for glass
Product features:
1   It can be used repeatedly .
2   Bad printing of glass is Soaked into 8008 , the ink layer will have  apparent soaking ,and will
     Swell or swell off .
2   No bad effect for surface of glass will be caused if long time soaking into PW-CM Method of use:
1   Put bad printing of glass into thePW-CM solution container for 5-20 minutes (  for ink layer  is
    difficult to peel off , soaking time can be longer ).
2   Use blade or Wooden shovel to clear the coating or use Rags to Rub ink layer in the8008
     solution container to make ink layer peel off .
3   If you use washing agent made by our company to wash the remain of glass surface , result
     will be better .
4  PW-CM can be used repeatedly, if 8008 solution become dirty or muddy , 8008 solution function
     won’t be effected and you can use Filter cloth Gauze(450 or 520) to filter Particle and can
     continue to use PW-CM.
5   For certain kind of glass ink , pls choose the right soaking time , long soaking time may make
     it difficult to clean .
Note :  
1   PW-CM is irritant for skin  :
        (1)  to avoid direct contact with PW-CM ,pls wear plastic gloves
        (2)  inhaling excessive 8008 may cause Respiratory tract uncomfortable ,so pls wear anti-
             poison respirator when working.
2   If PW-CM is splashed into eyes , pls use water to wash immediately and if it is very serious ,pls
     go to hospital to visit doctor .
3   PW-CM has volatility ,so if soaked in thePW-CMsolution container long time , pls cover the    
     container to avoid volatility .
4  PW-CM is inflammable , pls keep it away from fire source.
5   Pls use PW-CM at room temperature(20℃ )  . lower temperature (  especially at about 0 ℃ )
     may make PW-CM function decrease.